Sash clamp light aluminium bar

Introduction
A light aluminium bar sash clamp is adjustable and can be used for clamping material over a wide and varying distance.

How to use it
Set the width roughly using the adjusting pin on the fixed end of the clamp. Place the clamp over the work and tighten the clamping screw.

Where to use it
Use in light duty situations where heavy clamping pressure is not required. The aluminium bar will bend under too much pressure.

Maintenance
The screw thread requires occasional lubrication and the adjusting pins need checking for wear.

OHS issues
The clamp is not strong so don’t trust a job that is only clamped. If too much pressure is applied to the joint the clamp may slip causing damage and possible injury.