Toolbook

Second cut file

Second cut fileIntroduction
A second cut file is a grade or pitch finer than a bastard file and is used for cutting hard metals. It comes in both single and double cut files.

How to use it
The file is pushed across the surface to remove rough edges.

Where to use it
Used to shape material especially hard metals.

Maintenance
All files must be fitted with handles. Clean with a wire file card if it gets clogged.

OHS issues
Safety glasses must be worn. Take care of sharp burrs when handling a freshly filed components. Store carefully do not stack on other tools as files teeth are brittle.

 

Forming tools

Angle grinder electric 120mm
Ball pein hammer
Bastard file
Bevel square
Calculator
Centre punch
Centre square
Chalk
Chipping hammer
Chord rule
Clamp quick action
Cold chisel
Combination square
Dead blow hammer
Dividers
Drill electric 12mm chuck
Flattener
G clamp
Hacksaw
Mark out blue dye
Prick punch
Protractor
Rule stainless steel
Sash clamp heavy steel
Sash clamp light aluminium bar
Sash clamp medium size
Scriber
Second cut file
Set square
Sledge hammer medium weight
Spirit level
Straight edge
T-square
Tape measure retractable
Tin snips
Tongs
Try square
Vernier protractor

Drawing tools

Bevel square
Calculator
Chalk
Chord rule
Combination square
Compass
Dividers
Eraser
Eraser shield
Fine point pens
Flexi-curve
Mark out blue dye
Pencils
Prick punch
Protractor
Rule stainless steel
Sandpaper
Scale rule
Scriber
Set square
Straight edge
T-square
Tape measure retractable
Trammels
Try square
Vernier protractor

Measuring tools

Bevel square
Calculator
Centre punch
Centre square
Chalk
Chalk string line
Chord rule
Combination square
Dividers
Flexi-curve
Mark out blue dye
Prick punch
Protractor
Rule stainless steel
Scriber
Straight edge
T-square
Tape measure retractable
Trammels
Try square
Vernier protractor